Why Is My CrazyAce Vape Blinking?

The CrazyAce B15000 has quickly gained popularity among vaping enthusiasts due to its impressive features. It boasts a substantial 20mL e-liquid capacity, allowing for extended use without frequent refills. With a maximum puff count of 15,000, it provides a long-lasting vaping experience. The nicotine strength is 5% (50mg), catering to those who prefer a potent nicotine hit. Moreover, its rechargeable nature, supported by a 900mAh battery, ensures that the device can be used over and over again, making it both economical and environmentally friendly.

However, like all electronic devices, users might encounter issues during its use. One common concern is the blinking light on the CrazyAce Vape. This article will delve into the various reasons behind this blinking light and offer solutions to address them.

The Significance of the Blinking Light

The blinking light on your CrazyAce Vape is a form of communication from the device. It is designed to alert users to various conditions or issues that may need attention. Understanding these signals is crucial for maintaining the performance and longevity of your vape.

The number of blinks, the color of the light, and the frequency of the blinks can all convey different messages. Refer to the user manual for specific details related to your device. Generally, a blinking light might indicate issues such as low battery, low e-liquid, overheating, or other malfunctions.

Common Reasons for Blinking

1. Low Battery

Why It Happens

One of the most common reasons for the blinking light is a low battery. When the battery level is too low to power the device effectively, the light will blink to indicate that it needs to be recharged. This is a protective mechanism to prevent the device from completely draining the battery, which can damage the battery cells over time.

Signs and Symptoms

  • The blinking may occur just before or after you attempt to take a puff.
  • The number of blinks might vary depending on the brand's coding system, but typically it will blink multiple times in quick succession.


Recharge the device using the appropriate charger. Ensure that the charger is compatible and not damaged. It typically takes a few hours to fully charge the 900mAh battery. Once fully charged, the blinking should stop.

To recharge:

  1. Connect the USB charger to a power source.
  2. Attach the charger to your CrazyAce Vape.
  3. Wait until the light turns solid or turns off, indicating a full charge.

2. E-Liquid Levels

Why It Happens

The CrazyAce Vape may also blink if the e-liquid level is too low. Despite its large 20mL capacity, frequent use can deplete the e-liquid, and the device needs an adequate amount to function correctly. Running the device on low e-liquid can damage the coil, leading to burnt hits.

Signs and Symptoms

  • Blinking light occurs when attempting to vape.
  • You might also notice a decline in vapor production or a burnt taste when the e-liquid is low.


Since the CrazyAce Vape is a disposable device, it cannot be refilled. If you experience a blinking light due to low e-liquid, it indicates that it is time to dispose of the device and replace it with a new one.

3. Overuse or Overheating

Why It Happens

Vaping continuously for an extended period can cause the device to overheat. The device has an in-built safety feature that makes the light blink to alert you and temporarily shut down to cool off.

Signs and Symptoms

  • The device becomes warm or hot to the touch.
  • The blinking light may persist until the device cools down.


Allow the device to rest for a while. Continuous vaping can cause overheating, so taking breaks between puffs can help maintain the device's temperature and prevent blinking.

Preventive measures include:

  1. Taking regular breaks between puffs.
  2. Avoiding chain vaping.
  3. Using the device in a cooler environment.

4. Connection Issues

Why It Happens

Sometimes, the blinking might be due to a poor connection between the battery and the internal components. This can happen due to dirt, debris, or manufacturing defects that prevent proper electrical contact.

Signs and Symptoms

  • The device blinks when you attempt to vape.
  • No vapor is produced despite the device being powered on.


Since the CrazyAce Vape is a disposable device, it cannot be disassembled for cleaning or repair. If you suspect a connection issue, try gently tapping the device to ensure all internal connections are secure. If the problem persists, you will need to replace the device.

5. Faulty Coil or Atomizer

Why It Happens

A blinking light can also indicate a problem with the coil or atomizer. If the coil is burnt out or not functioning correctly, the device will blink as a warning. Coils in disposable vapes have a limited lifespan and cannot be replaced.

Signs and Symptoms

  • The device blinks when you press the power button.
  • You may experience a burnt taste or reduced vapor production.


If the coil in your CrazyAce Vape is faulty or burnt out, it is time to dispose of the device and replace it with a new one. Since the device is disposable, there are no user-replaceable parts.

6. Software Issues

Why It Happens

Although less common, software glitches can also cause the CrazyAce Vape to blink. This could be due to firmware bugs or errors in the device's programming.

Signs and Symptoms

  • Blinking occurs without any apparent physical issue.
  • The device may not respond to standard troubleshooting steps.


Disposable vapes do not typically offer firmware updates or software resets. If you suspect a software issue and the device is under warranty, contact the manufacturer for assistance. If not, replacing the device is the most practical solution.

Preventative Measures

1. Regular Maintenance

While disposable vapes like the CrazyAce Vape do not require extensive maintenance, keeping the device clean and using it properly can help prevent some issues that cause the blinking light.

  • Keep the mouthpiece clean and free of debris.
  • Store the device in a cool, dry place.
  • Avoid exposing the device to extreme temperatures or moisture.

2. Proper Usage

Avoid overusing the device and allow it to rest between vaping sessions. Follow the manufacturer's guidelines for usage to ensure optimal performance and longevity of your vape.

  • Avoid chain vaping.
  • Use the device within recommended settings.
  • Store the device properly when not in use.

3. Timely Replacement

Monitor the e-liquid levels and battery charge regularly. When the e-liquid is depleted or the battery no longer holds a charge, dispose of the device responsibly and replace it with a new one.

  • Do not attempt to refill or recharge the device beyond its designed capacity.
  • Replace the device when performance declines.


The CrazyAce Vape, with its substantial e-liquid capacity, high puff count, strong nicotine strength, and rechargeable battery, offers a premium vaping experience. However, understanding the reasons behind the blinking light can enhance your usage and prevent potential issues. Whether it’s a low battery, low e-liquid levels, overheating, connection issues, a faulty coil, or software glitches, addressing these problems promptly ensures that your CrazyAce Vape continues to perform at its best. Regular maintenance and proper usage can significantly extend the life of your device and provide a satisfying vaping experience. When the device reaches the end of its lifespan, responsibly dispose of it and replace it with a new one to continue enjoying your vaping experience.

Why Is My CrazyAce Vape Blinking?
Back to blog

Leave a comment

Please note, comments need to be approved before they are published.