Feeling a Burnt Flavor with Your Orion Bar? Let's Find Out Why!

Preventing Burnt Hits: A Guide for Your Orion Bar 10000 Vape

If you're a proud owner of the Orion Bar 10000 vape, boasting impressive features such as a spacious 20ml e-liquid capacity, up to 10,000 maximum puffs, 50mg (5%) nicotine strength, rechargeable 650mAh battery, and the convenience of a USB-C charger, you're likely keen on maintaining a smooth and flavorful vaping experience. However, encountering a burnt taste can quickly sour your enjoyment. Fear not, as this article aims to equip you with practical tips and techniques to prevent burnt hits and ensure that your Orion Bar 10000 vape consistently delivers satisfying vapor every time.

Understanding the Burnt Taste Issue

A burnt taste in your Orion Bar 10000 vape can be frustrating and typically indicates issues with the heating element, particularly the coil. This unpleasant taste can arise due to various factors:

  1. Insufficient E-Liquid: When the e-liquid level is low in your tank, the coil may not receive adequate saturation, leading to dry hits and burnt taste. Maintaining a sufficient e-liquid level is crucial to ensure proper wicking and vaporization.

  2. High Wattage Settings: Using wattage settings that exceed the recommended range for your coil's resistance can generate excessive heat, quickly burning the e-liquid and resulting in a burnt flavor. Always match your wattage settings to the coil's specifications to prevent overheating.

  3. Chain Vaping: Continuous vaping without allowing sufficient time for the coil to re-saturate with e-liquid can lead to dry hits and burnt taste. Taking short breaks between puffs allows the coil to absorb more e-liquid, preventing overheating and burnt flavors.

  4. Old or Worn-Out Coils: Coils have a limited lifespan and will eventually wear out. Using old or worn-out coils can result in inefficient vaporization of e-liquid, leading to burnt flavors. Regularly replace coils according to the manufacturer's recommendations to maintain optimal performance.

Tips to Avoid Burnt Taste

  1. Prime Your Coils: Before using a new coil or after replacing one, prime it by saturating the cotton wick with e-liquid. This helps prevent dry hits and ensures even vaporization.

  2. Monitor E-Liquid Levels: Keep your Orion Bar 10000 adequately filled with e-liquid to ensure proper wicking. Refill before the e-liquid level becomes too low.

  3. Adjust Wattage Settings: Match the wattage settings to the recommended range for your coil. Avoid exceeding the maximum wattage to prevent overheating.

  4. Allow Time Between Puffs: Take short breaks between puffs to give the coil time to re-saturate with e-liquid, especially during longer vaping sessions.

  5. Replace Coils Regularly: Replace coils according to the manufacturer's recommendations or when you notice a decline in flavor quality. Worn-out coils are more prone to producing burnt hits.

  6. Avoid Chain Vaping: Pace your vaping sessions and avoid continuous inhaling. Allow brief intervals to maintain optimal coil performance.

Proper Maintenance for Long-Term Performance

In addition to these tips, proper maintenance of your Orion Bar 10000 vape is crucial for consistent performance and flavor:

  1. Clean Your Device: Regularly clean the tank, mouthpiece, and airflow vents to remove any residue buildup that can affect flavor. Use a soft cloth or cotton swab dampened with water to gently wipe down these components. Avoid using harsh chemicals or abrasive materials that could damage the device.

  2. Inspect and Replace O-Rings: Check the O-rings (seals) located around the tank and mouthpiece for signs of wear or damage. Damaged O-rings can cause leaks and impact vapor production. Replace them as needed to maintain a tight seal and prevent e-liquid leakage.

  3. Store Properly: Store your Orion Bar 10000 in a cool, dry place away from direct sunlight and extreme temperatures. Exposure to heat and sunlight can degrade the quality of the device and e-liquids, affecting performance and flavor over time.

  4. Use High-Quality E-Liquids: Choose reputable e-liquid brands that use quality ingredients to minimize coil gunk and prolong coil lifespan. Avoid using overly sweetened or thick e-liquids, as these can contribute to faster coil buildup and potentially lead to burnt taste issues.

  5. Proper Charging: When charging your Orion Bar 10000, use the provided USB-C charger or a compatible charger with the correct specifications. Avoid using fast chargers or chargers with higher output than recommended, as this can damage the battery and affect overall performance. Ensure the device is fully charged before use to prevent issues related to insufficient power during vaping sessions.

By incorporating these maintenance practices into your vaping routine, you can optimize the longevity and performance of your Orion Bar 10000 vape while minimizing the risk of encountering burnt taste issues. Regular upkeep and proper care will not only enhance your vaping experience but also extend the lifespan of your device. If you have any questions or encounter persistent problems, don't hesitate to reach out to experienced vapers or consult with your local vape shop for personalized assistance.

Feeling a Burnt Flavor with Your Orion Bar? Let's Find Out Why!
Back to blog

Leave a comment

Please note, comments need to be approved before they are published.